ssl certs
|
|
Unistrut® 90° Angle Fitting to Fit Channel
You are here:
home >
Unistrut® 90° Angle Fitting to Fit Channel
|
|
click image to enlarge
|
|
Unistrut® 90° Angle Fitting to Fit Channel
$5.05
Catalog Number: Strut-P1325
Unistrut® 90° Angle Fitting, Model P1325, fits Channel
DESCRIPTION
P1325 Standard Dimensions (also see Specifications section further below):
- Hole Diameter: 9/16" (14.3mm)
- Hole Spacing (From End): 13/16" (20.6mm)
- Hole Spacing (On Center): 1-7/8" (47.6mm)
- Width: 1-5/8" (41mm)
- Length: 3-1/2" (89mm) and 4-1/8" (105mm)
- Thickness: 1/4" (6.4mm)
Finish: Galvanized
Nuts are not included with the fitting and must be ordered separately. Bolts can be procured locally.
Weight:
78 Lbs/100 Pcs
(35.4 Kg/100 Pcs)
Weight: 1 lbs
ADD TO CART
|
Specifications
Related Items
Accessories
|
Material:
- Fittings, unless noted, are made from hot-rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576, A635, or A36. The fitting steel also meets the physical requirements of ASTM A1011 SS GR 33. The pickling of the steel produces a smooth surface free from scale.
Application:
- All parts drawings illustrate only one application of each fitting. In most cases many other applications are possible. The channels shown in the illustrations are P1000, 1-5/8" square, except where noted otherwise.
- All 9/16" diameter holes use 1/2" x 15/16" hex head cap screws and 1/2" nuts – P1010, P4010 or P5510 – depending on the channel used. Nuts and bolts are not included with the fitting and must be ordered separately.
Design Bolt Torque:
Design Set Screw Torque:
Dimensions:
- Imperial dimensions are illustrated in inches. Metric dimensions are shown in parenthesis or as noted. Unless noted, all metric dimensions are in millimeters and rounded to one decimal place.
- Many Unistrut nuts, bolts and hardware items are also available in standard metric dimensions. Consult factory for ordering information.
Design Load:
- Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 2.5, unless otherwise noted.
|
Recently Viewed
|